TF Sort Flanges
Model TF flanges are produced from exactly the same high-strength cast iron because the S flanges, but are made to accommodate the international regular Taper Lock bushing for uncomplicated installation and removal
TF Sort flanges enable for mounting the bushing within the front (hub) side from the flange
TF flanges can be found in sizes 6 as a result of 
sixteen and may be utilized with any kind of sleeve as pictured on page SF-5
TR Sort Flanges
TR flanges are related to your TF style, but enable for the Taper Lock Bushing to get mounted and removed from
the reverse or serration side of your flange
The constrained torque ratings in the Taper Lock Bushings allow TR flanges to only be employed with EPDM or Neoprene sleeves
Different bushing sizes are utilized, so they’ve got various optimum bores than the TF flanges
Sizes six by way of 16 are available
Taper-Lock Bushings
The field typical taper lock bushing is often a split style and design permitting a compression match of your flange on the shaft without the need of set screws
The straightforward style can make the set up and elimination quick while the 8° taper grips tight and provides fantastic concentricity
A Lowered degree of stock is often attained because of the many other energy transmission components that use Taper Lock Bushings including: sheaves, sprockets, and pulleys
doesn’t offer you the Taper-Lock Bushings themselves as they’re broadly offered from other manufacturers
