Quick Details
Place of Origin:
Shandong, China
Brand Name:
Model Number:
Head Code:

Packaging & Delivery

Selling Units:
Single item
Single package size:
50X40X30 cm
Single gross weight:

Product Description

Flexible system riser generally installs fixed points at the bottom or top of each layer to prevent the pipe from bending. The riser connected to the branch pipe should have an intermediate fixing point; or increase the number of flexible joints to provide sufficient deflection angle to prevent damage to components or branches in the system. (2) The riser handling and welding system in the rigid system are very similar. When there is thermal expansion, the expansion joint and the soft joint are used to prevent the damage of the components in the system. When connecting with the pump, the rigid joint is designed. This system is the most have advantage of. (3) Combination system. When designing a combined riser system, rigid joints can be used to reduce the amount of guide brackets; flexible joints can partially compensate for displacement caused by thermal expansion and contraction. Fourth, the quality control points Grooved pipe fittings in addition to the bracket settings should be reasonable, the biggest quality common problem is leakage. The main reasons for the leakage are as follows: 1. Before the construction of the grooved pipe fittings, the operators should be trained to familiarize the operators with the construction points and avoid the leakage caused by the incorrect installation process. 2, the pipe cut is not flat, easy to cause leakage. In actual construction, the flatness error of the nozzle should be no more than 1.5 mm to ensure that the butt joint is straight when connecting. 3. In the operation of the rubber ring, the rubber ring should be cleaned with a brush before use. 4. When the clamp is installed, the bolt should be tightened symmetrically so that the rubber ring is evenly stressed to ensure the pipeline is sealed. In view of these main causes of leakage, proper and effective measures are taken to minimize the leakage of pipeline connections and ensure the excellent construction of the project.

Packaging & Shipping

As a new type of pipe joint technology, grooved pipe joints have obvious advantages of convenient construction and reliable quality. First, the connection of the pipe fittings 1. Clamp installation (1) Install the sealing ring: Put the sealing ring into one end of the pipe mouth, then align the other pipe mouth with the end pipe mouth, and move the sealing ring to the sealing surface of the two pipe ports. The sides of the seal should not protrude into the grooves of the two pipes. (2) Install the joint: first loosen the two screws of the joint, divide it into two pieces, put two pieces of shell on the sealing ring, insert the bolts, and tighten the nut in turn to ensure that the two ends of the shell enter the groove until it is tightened. 2, mechanical three-way, mechanical four-way installation First remove the bolt from the outer casing, loosen the other nut until the end of the bolt, the lower shell is rotated about 90 degrees from the upper shell, the upper shell outlet part is placed in the tube The mouth opening is centered and aligned with the hole, and then the lower shell is rotated along the tube end (for example, the mechanical cross, the lower shell method is the same as the upper shell) to close the upper and lower parts. 3. Flange plate installation Install the flange piece: first loosen the screws on both sides, separate the two flanges, insert the ring-shaped key parts of the two flange pieces into the groove of the grooved pipe end, and then put the two sides Screw the screws tightly and adjust the clearance on both sides to be close. Install the sealing ring: push the “Cshaped opening of the sealing ring away from the flange and push it into the inner diameter groove of the flange along the tube end. Second, the bracket setting 1, the fixed bracket and the guide bracket The hanger and bracket can control the degree of freedom of the pipeline, the spring hanger can make the pipeline fully free. Flexible joints allow for deflection in the pipe. This feature has great advantages in installation and engineering piping, but careful consideration should be given to the spacing of the brackets and hangers in the piping. The design and installation of the end supports must be carefully considered for the cumulative elongation of the pipe when the internal pressure increases or the temperature rises. Fixed fulcrums can be used to prevent pipe displacement caused by internal pressure and expansion. There are two types of fixed fulcrums: the main fixed fulcrum and the intermediate fixed fulcrum. 2. Influence of long pipelines For long-pipe systems, intermediate fixed points are used to disperse the forces generated by the thermal expansion of the pipeline and the internal pressure of the pipeline. The weight of the piping and equipment in the piping system needs to be supported by the brackets. In addition, some brackets should allow the ducts to expand and contract. 3. Influence of thermal expansion and contraction The displacement caused by thermal changes in the piping system can be partially compensated by the piping method. The flexible joint can effectively compensate the displacement of the pipeline caused by thermal expansion and contraction. If the predicted displacement exceeds the total joint compensation in the system, a metal expansion joint must be installed at the relevant location of the system. Third, the actual installation of the support and hanger in the Changli Road system Long riser system mainly has the following forms: (1)

Our Services

China Coal Industry Association mining fixed-point product manufacturers; national-level type inspection, coal safety mark products; the only domestic mine high-pressure 4.0Mpa pressure level report manufacturers, ductile iron ore grooved pipe joint manufacturing experts. The products have been serialized and can meet the different working conditions of high, medium and low pressure. The products are distributed in various coal producing provinces such as Shandong, Shanxi, Inner Mongolia, Ningxia, Anhui, Henan, Yunnan and Guizhou. Good market feedback!

Company Information