High-Quality Right Angle Equipment Drives are right angle worm gearbox designed for efficiency, quiet operation, and long service existence. SDP/SI provides a broad collection of Right Angle Gear Drives in a variety of configurations, materials, working speeds, and multiple ratios. Standard catalog products include precision and industrial quality gear drives provided in both inch and metric sizes. For adjustments or custom designs call and talk with a SDP/SI applications engineer.
Our providing includes, but is not limited to the following:
Miniature sized Right Position Gear Drives, 1 ” square, are ideal for compact designs that want low backlash and input speeds up to 2000 rpm.
When weight can be an issue, get Correct Angle Bevel Equipment Drives that include a lightweight casing of PTMT Polyester 30% glass filled, precision surface stainless steel shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Gear Drives accommodate input boosts to 2000 rpm and are available in gear ratios: 5:1, 10:1 and 20:1.
Right Angle and Dual Helical Equipment Drives can be found in two versions, light-duty, rated boosts to 600 rpm and heavy duty, rated speeds up to 1725 rpm.
An economy series of Correct Angle Bevel Gear Drives emerges in 1:1 and 2:1 ratios and rated boosts to 500 rpm.
E Series Right Angle
The Ever-Power E Series is a higher efficiency, right angle gear reducer made for increased torque density, reduced inventory and improved efficiency. Through the use of modified helical-bevel technology, the Electronic Series can operate at 90% performance and can provide up to 60% higher torque than a typical worm equipment reducer. Through various accessories and modular components, the Electronic Series recreates the critical dimensions of a typical worm gearbox and provides the chance to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with ratings to 27 HP.
Available in single, dual & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing equipment technology to fill the requirements of our OEM clients. Our close partnerships with our installed customer bottom provided much insight into their evolving need for more high-precision right-angle gearing options. In order to fill that require, Ever-Power extended upon our right angle product offering to include a variety of high-precision worm gearboxes, referred to as our EP Series.
These servo grade speed reducers are perfect for the most challenging of motion control applications. Each series includes a globoidal worm equipment mesh design in order to attain the torque handling capacity and the best levels of precision our SHIMPO customers attended to anticipate from us. The insight style of our EP right-angle gearbox applies the same idea of motor modularity that’s common across our High Precision product family, meaning our clients and distribution companions get the same level of flexibility, product range, and overall availability that’s unparalleled in your industry.
Advantages of the EP Series system design;
Quiet operation, in comparison to other competitive worm gearing
Compact, with exact reduction ratios
High torsional rigidity and torque carrying capacity
A lower life expectancy backlash feature, unique among right-angle gearheads
Industry regular hollow bore output with other shafted options
Extremely lightweight, optimized construction
Free of maintenance, lubrication for lifetime
These right-angle servo grade gearboxes are well suited for applications within custom assembly and test systems, packaging equipment, metal cutting and metal forming machinery, general purpose auto, among numerous others. If the application requires the small footprint of a right-angle worm gear without sacrificing on the overall performance, contact Ever-Power about the EP Series today.
Standard Right Position Gearbox Features
All ratios equipped with right-hand worm gears
Load capacity unaffected by direction and rotation
Variety of mounting Options
STAINLESS Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Speed Reducers
SWB-5 & SW-5
Right Angle Miter Equipment Drives
Miter Gear Drives
Mini Right Position Helical Gear Drives
Custom Speed Reducers
Custom Speed Reducers
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor efficiency is important. Contact our technical sales staff for help determining which gearbox option is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and allow for a corner switch with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting options providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The proper angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a solid and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest operation of our velocity reducers. These gearboxes are designed to manage varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to fit your needs. Our 52 frame size is also available with plastic gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest effectiveness and best output torque of all our quickness reducers. These gearboxes are created to handle varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options which range from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes will be the top choice for continuous duty applications. Their gear cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work very well in conditions with limited space. Our parallel shaft equipment reducers provide an affordable drop-in replacement solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a equipment in the kind of a screw, also referred to as a worm, meshes with a worm equipment. These gears are typically made from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm equipment reducers is that they produce an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to improve the path of the output, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Cast Iron Worm Gear Reducers can be found in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The systems have a one piece #Fc20 all cast iron housing, NEMA engine quill style input flanges or shaft inputs, come pre-filled with synthetic oil and also have a 12 months warranty.
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied inside and outside of the gearbox
Air dry special black paint
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
MANUFACTURERS PART Quantity HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Right Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR Moments) 27
Result SHAFT THRUST LOAD (LBS.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear rate reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in pounds for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are ideal for water/waste-water tools drive applications such as thickeners and clarifiers, which need a vertical straight down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where large torques/slow speeds are needed.
These reducers are also offered with a helical major reduction stage and so are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also referred to as gearboxes or swiftness reducers, are open gears within a housing. The housing supports bearings and shafts, keeps in lubricants, and protects the components from surrounding conditions. Gearboxes are available in a wide selection of load capacities and swiftness ratios.
The objective of a gearbox is to improve or reduce speed. As a result, torque output will be the inverse of the function. If the enclosed drive is usually a quickness reducer, the torque result increase; if the drive increases speed, the torque result will reduce. Gear drive selection elements include: shaft orientation, quickness ratio, design type, character of load, gear ranking, environment, mounting position, operating temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction velocity reducer can achieve up to 100:1 reduction ratio in a small package. Referred to as right angle drives, these contain a cylindrical worm with screw threads and a worm. With a single begin worm, the worm gear advances only 1 tooth for each 360-degree switch of the worm. So, regardless of the worm’s size, the apparatus ratio is the ‘size of the worm equipment to 1′. Higher reduction ratios can be created by using double and triple reduction ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 pieces of gears. Power is transmitted from a high-speed pinion to a slower-speed gear. Helical gears generally operate with their shafts parallel to one another. The two most common types are the concentric (insight and result shafts are in collection) and parallel shaft (insight and output shafts are offset). Single-stage helical equipment reducers are usually used for equipment ratios up to about 8:1. Where decrease speeds and higher ratios are necessary, dual, triple, and quadruple equipment reduction stages may be used.