Product Description

SWC WD Cardan Shaft(JB/T5513-91)

Cardan shaft is widely used in rolling mill, punch, straightener, crusher, ship drive, paper making equipment, common machinery, water pump equipment, test bench, and other mechanical applications.

Advantage:
1. Low life-cycle costs and long service life;
2. Increase productivity;
3. Professional and innovative solutions;
4. Reduce carbon dioxide emissions, and environmental protection;
5. High torque capacity even at large deflection angles;
6. Easy to move and run smoothly;

·Heavy Duty SWC WD Cardan Shaft Basic Parameter And Main Dimension(JB/T5513-1991)

·Note:1.Tf-Torque allowed by fatigue strength under varible load
          2.Lmin-Minimum length after shortening
          3.L-Installation length as required

·Product Show

Packaging & Shipping
Company Profile

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services

1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.

5. Quality Control
Every step should be a particular test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all customers with customized PDF or AI format artwork.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances. 

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order? 
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

cardan coupling

Suitability of Cardan Couplings for High-Speed and Heavy-Duty Applications

Cardan couplings are well-suited for a wide range of applications, including high-speed and heavy-duty ones. Here’s why:

  • High Torque Capacity: Cardan couplings can handle substantial torque loads, making them suitable for heavy-duty machinery and equipment.
  • Angular Misalignment: They can accommodate significant angular misalignment, which is common in applications with varying shaft angles.
  • Smooth Transmission: Cardan couplings provide smooth and continuous power transmission, essential for precision and stability in high-speed applications.
  • Robust Construction: They are often built with durable materials and designed to withstand the stresses of heavy loads and high speeds.
  • Shock Absorption: The flexibility of cardan couplings allows them to absorb shocks and vibrations, minimizing the impact on machinery components.
  • Versatility: Cardan couplings can connect shafts of different sizes and types, allowing for versatility in various applications.
  • Reliable Performance: When properly maintained and installed, cardan couplings offer reliable and consistent performance even in demanding conditions.

However, while cardan couplings are suitable for many high-speed and heavy-duty applications, it’s essential to consider factors such as alignment, lubrication, and maintenance to ensure optimal performance and longevity.

cardan coupling

Comparison of Cardan Couplings with Other Flexible Couplings

Cardan couplings, universal joints, and gear couplings are all types of flexible couplings used to transmit torque while accommodating misalignment. Here’s how a cardan coupling compares to other flexible coupling types:

1. Cardan Couplings:

– Also known as shaft couplings or u-joints.

– Typically consist of two yokes connected by a cross-shaped component called a spider.

– Accommodate angular misalignment.

– Limited to relatively lower speeds and torques.

– Provide moderate torsional flexibility.

2. Universal Joints:

– Consist of two yokes connected by cross-shaped pins and bearings.

– Accommodate angular misalignment similar to cardan couplings.

– Can transmit higher torques than cardan couplings.

– Limited in their ability to handle axial and parallel misalignment.

– Used in various applications, including automotive and industrial equipment.

3. Gear Couplings:

– Feature toothed gears that mesh to transmit torque.

– Accommodate angular, axial, and parallel misalignment.

– Suitable for high-speed and high-torque applications.

– Provide high torsional rigidity and accurate torque transmission.

– Require proper lubrication and maintenance.

When comparing these coupling types:

– Cardan couplings are simple and cost-effective solutions for moderate torque and speed applications with angular misalignment.

– Universal joints are versatile but may have limitations in handling higher torques and other misalignment types.

– Gear couplings offer superior torque and misalignment handling but are more complex and may require more maintenance.

The choice of coupling type depends on the specific application’s torque, speed, misalignment, and precision requirements.

cardan coupling

Factors to Consider When Selecting a Cardan Coupling for Specific Applications

Choosing the right cardan coupling for a specific application requires careful consideration of various factors:

  • Torque and Power Transmission: Determine the required torque and power capacity of the coupling to ensure it can handle the intended load without exceeding its limits.
  • Angular Misalignment: Assess the level of angular misalignment that might occur between the connected shafts and choose a coupling that can accommodate it without causing excessive wear or vibration.
  • Operating Speed: Consider the rotational speed of the shafts to ensure that the coupling’s design can handle the desired speed without causing issues like resonance or fatigue.
  • Environmental Conditions: Evaluate the operating environment, including factors like temperature, humidity, and exposure to contaminants, to select a coupling made from materials that can withstand these conditions.
  • Shaft Sizes and Types: Measure the diameter and type of shafts that need to be connected and choose a coupling with compatible dimensions and attachment methods.
  • Space Constraints: Consider the available space for the coupling within the machinery and select a compact design that fits without causing interference.
  • Maintenance Requirements: Evaluate the maintenance practices and frequency that will be feasible for your application and choose a coupling that aligns with those requirements.
  • Cost and Budget: Factor in the cost of the coupling and its potential impact on your budget while ensuring that the chosen coupling meets your performance needs.
  • Shock and Vibration: Determine if the application involves high levels of shock or vibration and select a coupling that can absorb or mitigate these forces to prevent premature failure.
  • Life Cycle and Reliability: Consider the expected lifespan of the machinery and choose a coupling that offers the desired level of durability and reliability.

By carefully considering these factors, you can select the most suitable cardan coupling for your specific application, ensuring optimal performance and longevity.

China best High Quality No Bolt Structure SWC Cardan Shaft Coupling  China best High Quality No Bolt Structure SWC Cardan Shaft Coupling
editor by CX 2023-10-10